The inch-to-centimeter conversion is defined exactly: 1 inch = 2.54 cm, no approximation, no rounding. This was set by international agreement in 1959 when the US and British yard was redefined in terms of the metric meter. Multiplying is trivial; what's interesting is where you end up using it.
The math
Multiply inches by 2.54 to get centimeters. For mental math, multiply by 2.5 for a quick estimate that's about 1.6% low, or by 2.5 and add 2% for closer accuracy. So 12 in × 2.5 = 30 cm (actual: 30.48). Going the other way: divide cm by 2.54, or multiply by 0.3937.
Screen, monitor and TV diagonals
Consumer displays are still sold by diagonal inches almost everywhere in the world. A 24-inch monitor is 61 cm, a 32-inch is 81.3 cm, a 55-inch TV is 140 cm, and a 65-inch TV is 165 cm. If a furniture listing says the TV stand fits screens "up to 55 inches" and your model is 140 cm diagonal, you're fine.
Body measurements
Waist, chest, hip and inseam measurements cross systems constantly. A 32-inch waist is 81.3 cm. A 34-inch inseam for jeans is 86.4 cm. Bra band sizes (34, 36, 38 inches) map to 77, 82, 87 cm approximately — though bra sizing is more complex than a simple conversion, with cup sizing adding another layer.
Tools, hardware and wrench sizes
American hardware is still widely sold in inches: a 1/2-inch bolt has a 12.7 mm diameter. A 3/4-inch socket is 19 mm. This creates real compatibility problems because metric sockets are made in 1 mm increments — close sizes aren't interchangeable, and using a 19 mm socket on a 3/4-inch nut will round the corners off the nut. Always match the system.
Historical note
Before 1959, different countries used slightly different "inches". The US inch was 2.540005 cm; the British inch was 2.539998 cm. For industrial purposes this mattered — parts manufactured in one country might not fit assemblies made in another. The 1959 agreement standardized everyone on exactly 2.54 cm, which is the definition still in force today.